• 1. The spindle is mounted with high precision P4 angular contact ball bearings, providing
  outstanding radial and trust loads.
• 2. The spindle is precision machined from high quality alloy steel, hardened ,precisiog
  ground and dynamically balanced, making it ideal for heavy cutting.
• 3. Quipped with high speed spindle, speed up to optional 3000 r.p.m.

• 1. Transformer
• 2. Hydraulic 3-jaw chuck
• 3. Electronic 4-way turret H4
• 4. Hydraulic turret V8
• 5. Follow rest
• 6. Hydraulic steady rest
• 7. Full enclosed splash guard
  (instead of semi-back splash guard change)
• 8. Rear chain type chip conveyor
• 9. X,Z axes MPG manual pulse generator
  (mounted on the Apron)

• 1. Controller : FANUC
• 2. Spindle variable speed change
• 3. Lubrication system
• 4. Coolant system
• 5. XZ-axes C3 ball screw
• 6. Quick change 4-way tool post
• 7. Manual Tailstock
• 8. Steady rest Ø6"
• 9. Semi-back splash guard
• 10. Heat exchanger
• 11. Work lamp
• 12. Dead center
• 13. Manual,level pads, tools & tool box
• 14. 3-jaw chuck SC-9"

*Standard accessories shall be subject to the quotation.

Unit: mm / inch

	Model	AL-460 / 560
		500	750
Capacity	Swing over Bed	460 (18.11")  /  560 (22.05")
	Swing over cross slide	230 (9.06") / 330 (13")
	Distance between centers	500 (19.69")	750(29.53)
	Width of Bed	317  (12.48")
	Length of Bed	1490(58.66")	1740(68.5")
Headstock	Spindle bore,  spindle speed	Manual spindle ( gear type ) : 70 (2.76) ,1800 rpm - variable speed
		OP: High speed spindle: 60 (2.36"), 3000 r.p.m. - variable speed,
		※ Chuck speed must match with spindle speed 3000 rpm.
	Spindle nose	A2-6
	Range of spindle speed	1800 rpm / OP.3000rpm
Travel	X-axis travel(cross slide travel)	230(9.06”) / 280 (11.03”) by standard manual 4-way tool post ◎ X-axis travel changed by different turret.
	Z-axis travel(longitudinal travel)	500 (19.67")	750(29.53)
		◎ Z-axis travel changed by different turret, chuck or Tailstock.
	X-axis ball screw diameter	25 mm , pitch 5 mm
	Z-axis ball screw diameter	50 mm , pitch 10 mm
Feed	X-axis rapid feed	5000 mm/min  (196.85" /min)
	Z-axis rapid feed	7500 mm/min  (295.28" /min)
	X-axis cutting feed rate	0-3000 mm/min  (118.11" /min)
	Z-axis cutting feed rate	0-5000 mm/min  (196.85" /min)
TURRET	Tool station, tool shank	Manual 4-way   20x20 (0.79"x 0.79")
Tailstock	Quill diameter	52 ( 2.05" )
	Quill travel	130 ( 5.12")
	Taper of center	MT.4
Motor	Spindle Motor	7.5kw (10HP)
	X-Axis servo Motor	1.2 kw (1.6HP)
	Z-Axis servo Motor	1.2 kw (1.6HP)
	Coolant pump	0.1 kw(1/8 HP)
	Optional : Hydraulic pump Motor	Optional: 1.5 kw (2HP)
Measurement	N.W./G.W.(approx) -AL-460 (kgs)	2600/2700	2750/2850
	N.W./G.W.(approx) -AL-560 (kgs)	2900/3000	3050/3150
	Shipping dimension-Semi-guard (LxWxH) (approx)	L:  2500 , 2750 x W 2000x  H2210 ( 98" , 109" x 79" x 87" )
	Shipping dimension-Full-guard (LxWxH) (approx)	L: 3300, 3550 x W2000x  H2210 ( 130", 140"   x 79" x 87" )
	Standard Color	Upper Parts: RAL-7035 (light gray) + Base : RAL-5015 (blue)

*Note :
(1) X and Z axes actual cutting travel will change when equipped with different chuck,turret, and tailstock.
(2) Specifications are subject to change without notice for improvement

Unit: mm / inch

	Model	AL-460 / 560
		1000	1500
Capacity	Swing over Bed	460 (18.11") / 560 (22.05")
	Swing over cross slide	230 (9.06") / 330 (13")
	Distance between centers	1000(39.37")	1500 (59.06")
	Width of Bed	317 (12.48")
	Length of Bed	1990(78.35")	2490 (98.03")
Headstock	Spindle bore,  spindle speed	Manual spindle ( gear type ) : 70 (2.76) ,1800 rpm - variable speed
		OP: High speed spindle: 60 (2.36"), 3000 r.p.m. - variable speed,
		※ Chuck speed must match with spindle speed 3000 rpm.
	Spindle nose	A2-6
	Range of spindle speed	1800 rpm / OP.3000rpm
Travel	X-axis travel(cross slide travel)	230(9.06”) / 280 (11.03”) by standard manual 4-way tool post ◎ X-axis travel changed by different turret.
	Z-axis travel(longitudinal travel)	1000 (39.37")	1500 (59.06")
		◎ Z-axis travel changed by different turret, chuck or Tailstock.
	X-axis ball screw diameter	25 mm , pitch 5 mm
	Z-axis ball screw diameter	50 mm , pitch 10 mm
Feed	X-axis rapid feed	5000 mm/min  (196.85" /min)
	Z-axis rapid feed	7500 mm/min  (295.28" /min)
	X-axis cutting feed rate	0-3000 mm/min  (118.11" /min)
	Z-axis cutting feed rate	0-5000 mm/min  (196.85" /min)
TURRET	Tool station, tool shank	Manual 4-way 20x20 (0.79"x 0.79")
Tailstock	Quill diameter	52 ( 2.05" )
	Quill travel	130 ( 5.12")
	Taper of center	MT.4
Motor	Spindle Motor	7.5kw (10HP)
	X-Axis servo Motor	1.2 kw (1.6HP)
	Z-Axis servo Motor	1.2 kw (1.6HP)
	Coolant pump	0.1 kw(1/8 HP)
	Optional : Hydraulic pump Motor	Optional: 1.5 kw (2HP)
Measurement	N.W./G.W.(approx) -AL-460 (kgs)	2900 / 3000	3300 / 3400
	N.W./G.W.(approx) -AL-560 (kgs)	3200 / 3300	3600 / 3700
	Shipping dimension-Semi-guard (LxWxH) (approx)	L: 3000, 3500 x W 2000x  H2210 (  118", 138" x 79" x 87" )
	Shipping dimension-Full-guard (LxWxH) (approx)	L:  3800,  4300 x W2000x  H2210 ( 150", 170"  x 79" x 87" )
	Standard Color	Upper Parts: RAL-7035 (light gray) + Base : RAL-5015 (blue)

*Note :
(1) X and Z axes actual cutting travel will change when equipped with different chuck,turret, and tailstock.
(2) Specifications are subject to change without notice for improvement

Model	L	W	H
AL-500	2620	1400	1800
AL-750	2870
AL-1000	3120
AL-1500	3620