CNC Facing Lathe
DHF-1120, 1220, 1320, 1420, 1520, 1620 X 1000
*Standard accessories shall be subject to the quotation.
Ideal for turning various flanges, rollers, aluminum alloy rings, valves, tire molds, and various mold bases.
 |
Middle Mounted Z-axis Ballscrew Considering the processing characteristics of the FACING LATHE, the design of Z-axis ballscrew mounted in the middle of Bed is adopted for DHK series. It has significant effect for saddle's moving smoothly and to raise the processing accuracy. It also promises a long life of ballscrew. |
- 1. This is a heavy duty precision CNC lathe that has the function of output full horse power
during low & high speed, available for big, special parts and mold work pieces. - 2. The structure of Bed is adopted high toughness meehanite cast iron; stabilize properly
parallel precision. Bed ways are induction hardened and ground. - 3. The slide way and ball screw can be lubricated automatically by central lubrication system.
Oil flow and lubrication frequency can be set as desired. An alarm occurs in case of lack of
oil. - 4. The Coolant system delivers high pressure coolant to flush chips and extend tool service life.
- 5. Mechanical and electrical are designed all in one.
- 1. Controller : FANUC
- 2. Spindle 4-step speed auto. change
- 3. XZ-axes auto. lubrication system
- 4 XZ-axes with Turcite-B
- 5. XZ-axes C3 ball screw
- 6. Z-axis adjustable zero point position
- 7. Hydraulic 4-way turret H4
- 8. Back chain type chip conveyor
- 9. Coolant system
- 10. Full enclosed splash guard
- 11. Heat exchanger
- 12. Electron hand wheel
- 13. Alarm lamp for working & cutting finish
- 14. Work lamp
- 15. Dead center (2 PCS / SET)
- 16. Level pads
- 17. Tools & Tool box
- 18. Operational manual
- 19. RS-232 interface
- 1-1. Controller : SIEMENS
- 1-2. Controller : FAGOR
- 2. Transformer
- 3-1. Hydraulic 3-jaw wedge type through-hole power chuck 18"
- 3-2. Hydraulic 3-jaw wedge type non through-hole power chuck 18"
- 3-3. 3-jaw chuck 20" , 25"
- 3-4. 4-jaw independent chuck 32" , 40" ,50"
- 4-1. Manual steady rest 16"
- 4-2. Manual steady rest 24"
- 5. Follow rest
- 6. 2-axes linear scale
- 7. Boring attachment
- 8. Spindle oil cooler
- 9-1. Hydraulic 4-way turret H4-VDI
- 9-2. Hydraulic turret V8
- 9-3. Hydraulic turret V12
- 10. Water spray gun
- 11. Air gun
Unit: mm / inch
| Model | DHF-1120 , 1220, 1320, 1420, 1520, 1620 | |||||
| X 1000 | ||||||
| Capacity | Max. swing over Bed | 1120 , 1220, 1320, 1420, 1520, 1620 (44", 48", 51.97", 55.91", 59.84", 63.78") |
||||
| Swing over cross slide | 700, 800, 900, 1000, 1100, 1200 ( 27.56", 31.5", 35.43", 39.37", 43.31", 47.24" ) |
|||||
| Bed | Width of Bed | 810mm (31.88") | ||||
| Bed way | Two guide way | |||||
| Headstock | Spindle bore | ø152 (6") |
OP:ø230 (9") |
OP:ø255 (10") |
OP:ø312 (12") |
OP:ø380 (15") |
| Spindle nose | A2-11 OP: A2-15 |
A2-15 OP:A2-20 |
A2-15 OP:A2-20 |
A2-20 | A2-20 | |
| Range of spindle speed | 6-500 rpm | 7-350 rpm | ||||
| 1. Range speed | 6-35 rpm | 7-20 rpm | ||||
| 2. Range speed | 19-112 rpm | 19-60 rpm | ||||
| 3. Range speed | 70-350 rpm | 40-121 rpm | ||||
| 4. Range speed | 226-500 rpm | 11-350 rpm | ||||
| * Spindle speed is changed by different horse power. | ||||||
| No. of spindle speeds | Auto 4 Steps / Hydraulic | |||||
| Travel | X-axis travel | Hydraulic turret: H4-HP-350 DHF-1100: 560(22.05"), DHF-1300~1600: 650(25.59”) * It is changed by different turret . |
||||
| Z-axis travel | 1000 mm (39.37") * It is changed by different turret, chuck or Tailstock. |
|||||
| Dia. X-axis ball screw | 40mm , pitch 10mm, C3 | |||||
| Dia. Z-axis ball screw | 63mm , pitch 10mm, C3 | |||||
| Feed | X-axis rapid feed | 5000mm/min (196.85" /min) | ||||
| Z-axis rapid feed | 5000mm/min (196.85" /min) | |||||
| X-axis cutting feed rate | 3000mm/min (118.11" /min) | |||||
| Z-axis cutting feed rate | 3000mm/min (118.11" /min) | |||||
| Turret | Turret type | Hydraulic 4-way Turret H4 | ||||
| Tool shank / Numbers | 40x40 (1.57"x1.57") | |||||
| Tool holder bore diameter | ø50 ( 1.97" ) | |||||
| Motor | Spindle Motor | 22 kw (α 22) | ||||
| X-axis servo Motor | 4 kw (α 22) | |||||
| Z-axis servo Motor | 4 kw (α 22) | |||||
| Hydraulic pump | 2 HP (1.5kw) | |||||
| Coolant pump | 1.7HP (1.275kw) | |||||
| Measurement | Machine size (L x W x H)-mm/inch | L: 4230 ( 166.54") x W: 2510 (98.85")~ 2760 ( 108.66") x H: 2115 (83.27") ~2365 ( 93.11") |
||||
| N.W. / G.W. (approx)-Kgs | 11700/12200, 12100 / 12600 , 12500 / 13000, 12900/13400, 13300/13700, 13700/14200 |
|||||
| Packing size for full splash guard (by 40' HQ container) | L:7100 (279.50") x W:2300 (90.6") x H:2670 (105.12") |
|||||
* We reserve the right to modify & improve our products without notice.
