CNC HEAVY DUTY POWERFUL LATHE
DHL / DHK-960 , 1120
Spindle bore : 6", 9", 12" / bed width : 24", 32"

photo shown : DHL-1120X4000 SPINDLE BORE:9" (230mm)

STANDARD ACCESSORIES:
1. Controller: FANUC 8. Steady rest 16"
2. Spindle 4-steps speed auto. change 9. Coolant system
3. XZ-axes auto. lubrication system
 10.Full enclosed splash guard
4. XZ-axes with Turcite-B
 11.Heat exchanger
5. XZ-axes C5 ball screw
 12.Dead center
6. Back chain type chip conveyor
 13.Tools & tool box
7. Manual tailstock
 14.Operational manual
OPTIONAL ACCESSORIES:
1-1 Spindle bore : 9"(230mm) 10Boring attachment
1-2 Spindle bore : 12"(305mm) 11Spindle oil cooler
2 Spindle motor 22~50 kw 12-1 Hydraulic 4-way turret H4
3Swing over bed:44"~63" (1120~1600mm) 12-2 Hydraulic 6-way turret H6
4-1 Controller : SIEMENS 12-3 Hydraulic turret V8
4-2 Controller : FAGOR 12-4 Hydraulic turret V12
5 Transformer 12-5 Hydraulic 4-way turret H4-VDI
6-1 3-jaw chuck 20", 25" 12-6 Power turret
6-2 3-jaw air chuck 13Hydraulic tailstock
6-3 Hydraulic 3-jaw wedge type through-hole power chuck 18" 14Double chuck device
6-4 Hydraulic 3-jaw wedge type non-through-hole power chuck 18" 15Double turret
6-5 4-jaw independent chuck 32", 40", 50" 16Grinder
6-6 Face plate with 4-jaw 32", 40", 50" 17Multi screw cutting device
7-1 Manual steady rest 16" 18Drilling device
7-2 Manual steady rest 24" 19Customized tailstock (Used for chuck)
8Follow rest 20Hydraulic steady rest
92-axes linear scale  

FEATURES :

1.This is a heavy duty precision CNC lathe that has the function of output full horse power during low & high speed, available for big,
special parts and mold work pieces.

2. The structure of bed is adopted high toughness meehanite cast iron; stabilize properly parallel precision, bed ways are induction
hardened and ground.

3. The slide way and ball screw can be lubricated automatically by central lubrication system. Oil flow and lubrication frequency can
be set as desired. An alarm occurs in case of lack of oil.

4. The coolant system delivers high pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

SPECIFICATION Unit: mm / inch

ITEM / MODEL WIDTH OF BED 24” (610)
DHL-960
DHL-1120
ITEM / MODEL WIDTH OF BED 32” (810)
DHK-960
DHK-1120
CAPACITY
 Max. swing over bed
960 (37.78")
1120 (44.09")
Swing over cross slide
600 (23.6")
760 (30")
Distance between centers
1500
(59")
2000
(78.74")
3000
(118.11")
4000
(157.48")
5000 (196.85")
6000 (236.22")
Bed way of carriage
1 prism way + 1 box way
Bed way of cross slide
Dovetail slide way
BED
 Width of bed
DHL-610 (24") / DHK-810 (32")
Length of bed-DHL
3400
(133.86")
3900
(153.54")
4900
(192.91")
5900
(232.28")
6900
(271.65")
7900
(311")
Length of bed-DHK
3950
(155.51")
4450
(175.2")
5450
(214.57")
6450
(253.94")
7450
(293.3")
8450
(332.68")
Bed way
2 Guide way
HEADSTOCK
 Spindle bore
ø152 (6")
OP:ø230 (9")
OP:ø305 (12")
Spindle nose
A2-11 / OP: A2-15
A2-15 / OP: A2-20
A2-20
Spindle speed
6-650 rpm
6-292 rpm
* Spindle speed changed by different horse power.
No. of spindle speeds
4 Steps / Hydraulic
Spindle taper
MT 6
TRAVEL
 X-axis travel
600 (23.62”) for hydraulic turret: H4 (HP-250)
* X-axis travel changed by different turret.
Z-axis travel
1500
(59")
2000
(78.74")
3000
(118.11")
4000
(157.48")
5000
(196.85")
6000
(236.22")

* Z-axis travel changed by different turret, chuck or tailstock.
Dia. of X-axis ball screw-DHL
DHL 32 mm, pitch 5 mm
Dia. of X-axis ball screw-DHK
DHK 40 mm, pitch 10 mm
Dia. of Z-axis ball screw
63 mm, pitch 10 mm
FEED
 X, Z-axis rapid feed
5000 mm/min (196.85"/min)
X, Z-axis cutting feed rate
3000 mm/min (118.11"/min)
OP-TURRET
 Turret type
OP: Hydraulic Turret H4,H6,V8,V12,H4-VDI / Power Turret
Tool shank / Numbers
32x32 (1.23"x1.23")
Tool holder bore diameter
ø50 (1.97")
TAILSTOCK
 Quill dia.
125 (4.92")
Quill travel
200 (7.87")
Quill taper
MT6
Body movement
Carried by saddle
Body lock-type
Manual (OP: Hydraulic type)
Quill movement
Manual (OP: Hydraulic type)
MOTOR
 Spindle motor

Continuous 18.5 kw (OP:22~50 kw)

30 min Rating 22 kw
X-axis servo motor

3 kw
Z-axis servo motor

4 kw
Hydraulic pump

1.5 kw (2HP)
Coolant pump

1.275 kw (1.7HP)
MEASUREMENT for DHL
 Machine size (LxWxH)
5500
(217")
6000
(236.2")
7000
(275.6")
8000
(315")
9000
(354.3")
10000
(393.7")
W: 2370(93.3") x H: 1990(78")
Floor space (LxW)
L: 5650(217"), 6150(242"), 7150(281"), 8150(321"), 9150(360"),
10150(400") x W: 2520(99")
N.W. / G.W. (Approx) DHL-960
11100/
11600
11600/
13600
12600/
14800
13600/
16000
14600/
17200
15600/
18400
N.W. / G.W. (Approx) DHL-1120
12100/
12600
12600/
14600
13600/
15800
14600/
17000
15600/
18200
16600/
19400
MEASUREMENT for DHK
 Packing size (by 40' HQ container)-for full splash guard (LxWxH)
5750
(226.4")
6250
(246.1")
7250
(285.4")
8250
(324.8")
9250
(364.2")
10250
(403.2")
W: 2300(90.6") x H: 2400(94.5")
N.W. / G.W. (kgs)(Approx)
DHK-960
13000/
14600
13600/
15800
14800/
17200
16000/
18600
17200/
20000
18400/
21400
N.W. / G.W. (kgs)(Approx)
DHK-1120
14000/
15600
14600/
16800
15800/
18200
17000/
19600
18200/
21000
19400/
22400
Machine size, Floor space, Packing size are offered on request.
Color
Upper parts: RAL-7035 (Light gray) + Base: RAL-7024 (Dark gray)
*We reserve the right to modify and improve our products without notice.
Copyright © DENVER IND.CO.,LTD. Hosted by Machinetools Directory (S & J Corp.), Plastic and Rubber Machine Directory.