DENVER IND.CO.,LTD. High speed bariable-speed lathe、high speed precision lathe、High speed precision lathe、cnc heavy duty lathe、cnc vertical milling machine

CNC HEAVY DUTY LATHE
DL-660 , 760 X 1000 , 1500 , 2000 , 3000

APPLICATIONS :

Ideal for turning various flanges, rollers, aluminum alloy rings, valves, tire molds, and various mold bases.

STANDARD ACCESSORIES:
1. Controller : FANUC-0i-TC	12. Steady rest 11 1/2"
2. Spindle 4-steps speed auto. change	13. Full enclosed splash guard
3. Headstock oil cooler system	14. Enclosed electric cabinet
4. Lubrication system	15. Heat exchanger
5. Coolant system	16. Electron hand wheel
6. XZ-axes with Turcite-B	17. Alarm lamp for working,& cutting finish
7. XZ-axes C5 ball screw	18. Halogen light
8. Z-axis adjustable zero point position	19. Dead center
9. Manual 4-way tool post	20. Level pads
10. Manual tailstock	21. Tool & tool box
11. Tailstock interference protection	22. Operational manual


Controller : FANUC-Oi-TC	Spindle 4-steps speed auto change	Spindle oil cooler system

Tailstock	Enclosed electric cabinet	High quality control components

OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC	5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC	5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600 (POU YUAN made in Taiwan)	6 Chip conveyor with bucket
2 Transformer	7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12"	8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12"	9 Tailstock hydraulic quill
3-1 3-jaw 12"	10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”

Controller : FAGOR 8040TC

Controller : FAGOR 8055TC

Electronic 4-way turret H4

Boring attachment

Hydraulic turret V8


3-jaw wedge type through-hole power chuck 12"	3-jaw wedge type non through-hole power chuck 12"	3-jaw chuck 12"	4-jaw independent chuck 20"

FEATURES :

1.This is a heavy duty precision CNC lathe that the function of output full horse power during low & high speed, available for big,

special parts and mold work pieces.

2. The structure of bed is adopted high toughness meehanite cast iron; stabilize properly parallel precision. Bed ways are induction

hardened and ground.

3. The slide way and ball screw can be lubricated automatically by central lubrication system. Oil flow and lubrication frequency can

be set as desired. An alarm occurs in case of lack of oil.

4. The coolant system delivers high pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

SPECIFICATIONS Unit: mm / inch

SPECIFICATION		DL
ITEM		660 / 760
MODEL		1000	1500	2000		3000
CAPACITY	Swing over bed	660 (26") / 760 (29.92")
	Swing over cross slide	400 (15.75") / 500 (19.69")
	Distance between centers	1000 (39.37")	1500 (59.06")	2000 (78.74")		3000 (118")
	Width of bed	420 (16.54")
	Spindle end face to gap	300 ( 11.8")
	Length of bed	2640 (103.94")	3140 (123.62")	3640 (143.3")		4640 (182.68")
	Bed way of carriage	1 mountain way + 1 box way
	Bed way of cross slide	Dovetail slide way
HEADSTOCK	Spindle bore	105 (4.13")
	Spindle taper	MT 5
	Spindle nose	A2-8
	Range of spindle speed	20-1500rpm * It changed by different horsepower of motor.
	No. of spindle speed	4 steps
TRAVEL	X-axis travel (cross slide travel)	Manual 4-way (Opt.) OP- H4 – 380 (14.96" ) / V8- 310 (12.2" ) / VDI-40 –285 (11.22") * It changed by different turret .
	Z-axis travel ( longitudinal travel)	1000 (39.37")	1500 (59.06")		2000 (78.74")	3000 (118")
		* It changed by different turret、chuck or tailstock.
	X-axis ball screw diameter	25 mm , pitch 5 mm
	Z-axis ball screw diameter	50 mm , pitch 10 mm
FEED	X-axis rapid feed	5000 mm/min (196.85" /min)
	Z-axis rapid feed	7500 mm/min (295.28" /min)
	X-axis cutting feed rate	0-3000 mm/min (118.11" /min)
	Z-axis cutting feed rate	0-5000 mm/min (196.85" /min)
TURRET	Tool station	manual 4 way (Opt.) ( OP- H4 / V8 / VDI-40 )
	Size of external turning	25x25 (0.98" x0.98") (Opt.) ( OP-32 x 32 (1.23"X1.23") )
	Boring bar diameter	40 ( 1.57" )
TAILSTOCK	Quill diameter	105 (4.13")
	Quill travel	180 (7.09")
	Taper of center	MT 5
	Body movement	Carried by saddle
	Quill movement	Manual ( OP- Hydraulic type)
MOTOR	Spindle motor	7.5kw ( 10 HP ) , 30 min/cont.
	X-axis servo motor	1.3 kw ( 1.73 HP)
	Z-axis servo motor	2.2 kw (2.93 HP)
	Hydraulic pump motor	1.5 kw ( 2 HP)
	Coolant pump	0.75 kw (1HP )
MEASUREMENT	N.W. / G.W. (approx) (kgs)DL-660	4600 / 4800	5200 / 5400	5900 / 6200		7000 / 7300
	Machine dimensions (kgs)DL-760	4900 / 5100	5500 / 5700	6200 / 6500		7300 / 7600
	(L x W x H)(approx)	(152"x84"x76")	(172"x84"x76")	(192"x84"x76")		(231"x84"x76")
	Packing size ( by1x20’container )	4500x2290x2240	5000x2290x2240	5500x2290x2240		6500x2290x2240
	(L x W x H)(approx)	(177"x90"x88")	(197"x90"x88")	(217"x90"x88")		(257"x90"x88")
	Standard color	Upper parts: RAL-7035 light gray + Lower parts: RAL-7024 dark gray
* We reserve the right to modify & improve our products without notice.

BACK - PRODUCTS | NEXT