|
MULTIPLE GUIDE WAY HEAVY DUTY CNC LATHE (FLAT BED)
RHL-960 / 1120 |
|
| STANDARD ACCESSORIES |
| 1. Controller: FANUC |
11. Semi- back splash guard |
| 2. Spindle 4-steps hydraulic auto speed |
12. Heat exchanger |
| 3. XZ-axes auto. lubrication system |
13. Electron hand wheel |
| 4. XZ-axes with turcite-B |
14. Alarm lamp for working, cutting & finish |
| 5. XZ-axes C5 ball screw |
15. Work lamp |
| 6. Hydraulic 4-way turret H4 □ 32 |
16. Dead center |
| 7. Chip conveyor |
17. Level pads |
| 8. Manual / Auto tailstock |
18. Tools & tool box |
| 9. Tailstock interference protection |
19. Operational manual |
| 10. Coolant system |
20. 4-jaw independent chuck 32" |
| OPTIONAL ACCESSORIES |
| 1-1. Controller: POU YUAN |
6. Follow rest |
| 1-2. Controller: SIEMENS |
7. Hydraulic tailstock |
| 1-3. Controller: FAGOR |
8. Programmable tailstock |
| 2. Transformer |
9. Hydraulic turret H4-VDI, V12 |
| 3. Hydraulic 3-jaw wedge type through -hole power chuck 18” |
10. Full splash guard |
| 4. Hydraulic 3-jaw wedge type non through -hole power chuck 18” |
11. 2-axes linear scale |
| 5-1. Manual steady rest 16" (O type or C type) |
12. 4-jaw independent chuck 40" |
| 5-2. Manual steady rest 24" (O type or C type) |
|
| 5-3. Hydraulic steady rest 16" |
|
|
 |
●Equipped Turret System
 Equipped with high rigidity structure, & quick tool change. Equipped with 4-way turret or V8 hydraulic turret to go free maching
 processing needs.
Equipped "double-cam-plate" for indexing mechanism, smooth with turbo-speed to turn the tool-disc, with compact design & high
durablity, suitable fo heavy cutting of precision.
Driving source per hydraulic to turning tool-disc, indexing and clamping / unclamping, precisely and correctly.
Smart selection of nearby tools, controlled via proximity-detector and PLC programming, no error of tool-disc change. |
 |
●Box-Bottom Bed Design
High - rigidity body structure, the main structures of all aircraft used high MEEHANITE material. One piece casting. Box at the bottom
of the design and strengthen their internal structure, raise the cutting strength of large workpiece. |
 |
●Tailstock
Self-Rotary quill, when the main spindle turns, the tailstock's quill turns simultaneously (synchrony) with
the main spindle, which
lightens load while raising stability.
Mounted with taper roller baerings can bear heavy duty cutting.
The quill is hardened and precision ground, adopted worm gear type design for extending and retracting and
matched with gear motor,
that is controlled easily and prevent the quill form retraction.
The main body of tailstock matched with gear motor can move smoothly.
The base of tailstock matched with rack equipment has an effect to prevent the tailstock body from retraction.
Original slanted screw and lock device with a positioning key ensure the stability of the work piece being processed.
Hydraulic quill or hydraulic tailstock with lock bolt are optional. |
 |
●R&D Innovation Structural Multi Guide Way
The bed is designed with 5 guide ways as follow figure.
Processing guide ways won't interfere with the guide way for workpiece.
The design of leadscrew set in the middle let the effect of saddle movement to be more smoother.
Special design for Apron Support guide way provide cutting capacity with heavier load.
 The leadscrew for lathe over 4 meter is equipped with extra linear way to strength the support capacity, increase the processing
accuracy, and lower down the abrasion of ball screws. |
SPECIFICATION Unit: mm / inch
ITEM / MODEL |
RHL-960 |
RHL-1120 |
|
CAPACITY |
Max. Swing over Bed |
960 (37.78") |
1120 (44.09") |
| Center-Center |
2000 (78.74") 3000 (118.11") 4000 (157.48") 5000 (196.85") |
| Max. Roll Cutting Dia. |
800 (31.5") |
1000 (39.37") |
| Max. Roll Cutting Dia. |
- |
100 (4") |
| Max. Cutting Length |
2000 (78.74") 3000 (118.11") 4000 (157.48") 5000 (196.85")
|
| Bed Way |
Multiple Guide Way
|
BED |
Width of Bed |
1250 (49.21") |
| Length of Bed |
4000 (157.48") 5000 (196.85") 6000 (236") 7000 (275.59") |
|
HEADSTOCK |
Spindle bore diameter |
Ø152 (6") OP: (230)9", (305) 12" |
| Spindle nose |
A2-11 |
| Spindle auto speed |
4 Steps / Hydraulic |
| No. of spindle speed |
6 - 650 rpm ( 6-38 / 25-123 / 85-460 / 250-650 r.p.m) |
It is changed by different horse power. |
|
TRAVEL |
X-axis travel |
Hydraulic turret H4: 400 (15.75") |
It is changed by different turret. |
| Z-axis travel |
2000 (78.74") 3000 (118.11") 4000 (157.48") 5000 (196.85) |
It is changed by different turret , chuck or tailstock. |
| Dia. of X-axis ball screw |
40 mm, pitch 10 mm |
| Dia. of Z-axis ball screw |
63 mm, pitch 10 mm |
|
TurRET |
Turret type |
Hydraulic turret H4 or V8 (OP: H4-VDI, V12) |
| Tool shank / Numbers |
32 x 32 (1.23" x 1.23") (OP: 40 x 40 (1.57" x 1.57") ) |
| Tool holder bore Dia. |
Ø50 (1.97") |
tailstock |
Quill Dia. |
150 (5.9") |
| Quill travel |
160 (6.3") ~ 200 (7.87") / Max.300 (11.81") |
| Quill taper |
MT6 |
| Lock-type |
Manual or Hydraulic (optional) |
|
MOTOR |
Spindle motor |
α18-18.5 / 22 kw (OP:37 kw) |
| X-axis servo motor |
α 22 / 4 kw |
| Z-axis servo motor |
α 22 / 4 kw |
| Tailstock body drive motor |
0.4 kw |
| Tailstock quill drive motor |
0.2 kw |
| Hydraulic pump |
2 HP (1.5kw) |
| Coolant pump |
1/2 HP (0.375kw) |
|
MEASUREMENT |
Machine size |
L: 4250 (167.3") 5250 (206.7") 6250 (246.1") 7250 (285.4") x W: 2260 (89") |
| Floor space |
L: 6650 (261.8") 7650 (301.2") 8650 (340.6") 9650 (379.9") x W: 3820 (150.4") |
| N.W. / G.W. (approx)-960 (kgs) |
15500/16400, 17500/18500, 19500/20600, 21500/22700 |
| N.W. / G.W. (approx)-1120 (kgs) |
16000/16900, 18000/19000, 20000/21100, 22000/23200 |
| Packing size for semi back splash guard (by 40' HQ container) |
L: 6600 (259.8") 7600 (229.2) 8600 (338.6") 9600 (378") x W: 2300 (150.4") x 2400 (94.5") |
| Color |
Upper parts: RAL-7035 (Light gray) + Base: RAL-7024 (Dark gray) |
*We reserve the right to modify and improve our products without notice.
|
