HEAVY DUTY BED
TYPE VERTICAL MILLING MACHINE
DM - 4V / 4VS / 5V / 5VS
|
 |
STANDARD
ACCESSORIES |
| 1.Spindle
micrometric feed |
| 2. X,Y,Z-axes
variable feed |
| 3. X,Y,Z-axes
ball screw |
| 4. X,Y,Z-axes
auto lubrication system |
| 5. X,Y,Z-axes
with Turcite-B |
| 6. Z-axis
rapid traverse |
| 7. Z-axis
brake motor |
| 8. Coolant
system |
| 9. Draw bar |
| 10. Rear rubber
dust guard |
| 11. Front telescopic cover |
| 12. Electric
control box & panel |
| 13. Halogen light |
| 14. Tools & tool box |
| 15. Operation manual |
| 16. Digital speed display (only for DM-4VS,5VS) |
|
OPTIONAL
ACCESSORIES |
| 1. Splash guard |
| 2. Air draw bar |
| 3. Digital readers |
| 4. pneumatic locks on Z-axis |
FEATURES :
1.Casting made of high FC-30 high quality for extra rigidity.
2.Spindle of SCM-21 alloy steel & precision ground, with class P4 bearings to ensure best accuracy on high speed running.
* Spindle motor of DM-5VS with AC 5HP magnetic brake, it may stop - running at the twinkling.
3.Milling head with balance weight for smooth elevating movement.
4.Bed & column as box type, long square sliding ways, & wider base for turning stability.
5.Square slide way have been ultra-frequency treated & precision ground, XYZ-axes with Turcite-B.
6.XYZ-axes with ball screw to smooth in precision cutting.
7.XYZ-axes with brake motor rapid feeding, controlled by inverter, for automatic & vari speed with high accuracy position.
8.All sliding way with automatic lubrication.
HEAD TYPE
 |
 |
 |
 |
| DM-4V Pully step |
DM-4Vs inverter vari |
DM-5V Pully step |
DM-5Vs inverter vari |
SPECIFICATIONS  Unit:
mm / inch
ITEM
/ MODEL |
DM-4V |
DM-4VS |
DM-5V |
DM-5VS |
|
|
PULLY
STEP |
INVERTER
VARI |
PULLY STEP |
INVERTER VARI |
|
TABLE |
Table surface |
1520x430 (59.84"X16.93") |
| T-slots (No.
x width x Pitch) |
3x16x80P |
| Table to column |
80 - 550 (3.15"X21.65") |
| Height from floor to table surface |
955 (37.6") |
|
CAPACITY |
X Y Z-axes travel |
1050x500x600 (41.34" X 19.69" X
23.62") |
| Quill
travel |
150 (5.9") |
140 (5.51") |
|
SPINDLE |
Spindle taper |
NT-40 |
| Spindle
speed (rpm) |
50 Hz:3600
60 Hz:3900
|
3600 |
50 Hz:3000
60 Hz:3600 |
3600 |
| Quill Diameter |
105mm (4.13") |
110mm (4.33") |
| Spindle Swivelling
angle |
45° |
| Spindle
nose to table surface |
70-670 (2.76"-26.38") |
| Spindle center to column |
515 (20.28") |
|
FEED RATE |
| Quill feed rate |
0.04 / 0.08 / 0.15
mn / rev |
0.035 / 0.07 / 0.14
mn / rev |
| XY-axes feed rate |
28-1260
mm / min |
| Z-axis feed rate |
17-788
mm / min |
|
MOTOR |
Spindle motor |
5HP |
| XY-axes motor |
1HP |
| Z-axes motor |
1/2HP |
| Coolant pump |
1/8HP |
|
MEASUREMENT |
Machine size |
2230 x 1600 x 2200 (88" x 63" x 87") |
| Packing size |
2000 x 1800 x 2400 (79" x 71" x 95") |
| N.W. / G.W. |
3000 / 3200kgs |
| Standard color |
RAL-7035 light gray + RAL-5015 blue |
*We reserve
the right to modify and improve our products without notice.
|